Tractor of The Week
This is the Farmall Cub which was produced by International Harvester from 1947-1964.
Specs:
Farmall Cub Engine: | |
International Harvester 1.0L 4-cyl gasoline |
Capacity: | |
Fuel: | 7.5 gal [28.4 L] |
Hydraulic system: | 0.56 gal [2.1 L] |
Rear Hitch: | |
Type: | IH Fast Hitch (optional) |
Power Take-off (PTO): | |
Rear PTO: | independent |
Rear RPMs: | 1600, 1800 (counter-clockwise) |
Dimensions & Tires: | |
Wheelbase: | 69.25 inches [175 cm] |
Weight: | 1477 to 2891 pounds |
Front tire: | 4.00-12 |
Rear tire: | 8-24 |
Farmall Cub attachments: | |
mowing deck | |
blade | |
front-end loader |
Farmall Cub Power: | |
Drawbar (claimed): | 10 hp [7.5 kW] |
PTO (claimed): | 11 hp [8.2 kW] |
Belt (claimed): | 9.76 hp [7.3 kW] |
Plows: | 1 (12 inch) |
Drawbar (tested): | 9.87 hp [7.4 kW] |
Belt (tested): | 10.39 hp [7.7 kW] |
Mechanical: | |
Chassis: | 4x2 2WD |
Steering: | manual |
Brakes: | differential contracting band |
Cab: | Open operator station. |
Hydraulics: | |
Capacity: | 0.56 gal [2.1 L] |
Pressure: | 1200 psi [82.7 bar] |
Total flow: | 2.8 gpm [10.6 lpm] |
Electrical: | |
Ground: | positive |
negative (sn 224401) | |
Charging system: | generator |
All tractor specs provided by TractorData.com.
No comments:
Post a Comment